uneven temperatures in your home

Once you realize that it's time for a new air conditioning system to be installed in your home, there are several things you should do beforehand. Whether you are looking for a more energy-efficient solution or your AC unit just needs to be upgraded, the installation process will be smoother if you take a few steps in preparation. These tips will help you ensure that everything is all set and ready to go before the HVAC contractor's arrival.

1) Make sure that all of the ductwork is clean.

You don't want to force your new AC system to operate with dirty ductwork. Take the time to thoroughly clean out your ducts of any dust and dirt that may have become trapped inside. Shut off the power to the system before you start the work, and then use a vacuum cleaner with a long hose to sweep out the ducts. You can also use a soft cloth to wipe down the parts of the duct that you can easily reach by hand. Don't neglect the return air registers and the furnace filter as you clean. Additionally, seal the ducts with HVAC sealing tape or another type of duct sealant.

2) Clear out the area around the AC system.

Your new air conditioning unit cannot be installed if there is too much clutter in the way. The contractor will require ample space to move around, so you should clear away any barriers that could make the job difficult. Remove all furniture, rugs, and other obstacles that could hinder the contractor's job. You'll also need to make sure that there is an unobstructed path to the room where the unit will be located. Keep children and pets out of the area while the contractor is working. A direct way through to the site will help the contractor avoid accidents and prevent damage to your property.

3) Ask the contractor to show you the load calculation during the consultation. 

Your HVAC contractor will conduct a load calculation to decide what AC unit is ideal for your home. This calculation factors in the square footage of your home, ceiling height, and the dimensions of the specific room where the new unit will be placed. Although this information is computed by your contractor, you should still review the details and confirm that the correct AC unit is installed. The wrong air conditioning system could significantly decrease your energy efficiency, so you should check the AC equipment for accuracy before the work being completed.

These steps will greatly help your HVAC contractor get your new air conditioning system successfully installed without any major problems. Learn more by contacting companies like Bud's Plumbing, Heating, Air Conditioning & Electric.